Minec 4x Bedienungsanleitung PDF herunterladen (Seite 38)

Minec 4x

3.7.3 Scanner Setup

This applet, available on the Desktop, contains the configuration parameters of the

barcode scanning or of the RFID reading in a directory tree structure. The available

barcode / RFID parameters are divided into two groups: Reader Parameters and

Scan Parameters.

The Reader Parameters depend on the type of data capture collector installed on the

terminal. If it is a laser module, it allows barcode configuration (i.e. enable/disable

Code 39, check digit control, etc.). If it is an RFID module, it allows the selection of

the tag type (i.e. ISO-15693). It is possible to select only one tag at a time. To select

a different tag, this parameter must be set again.

The Scan Parameters allow control of the data capturing process (i.e. beeper control,

LED control, scanning timeout, etc.).

Each Barcode Setup screen window corresponds to a branch of the tree, and the

name of the current branch is displayed at the bottom of each screen window.

The screen format shows two columns where the left column indicates branches or

parameters. Branches have three dots in the right column (...). You can navigate

through the tree structure using the keyboard arrows directly on the item field or from

the menu.

Parameters have their corresponding current values in the right column. You can edit

parameter values using the keyboard arrows directly on the item field or from the

menu. To change a value for example, select the line of the value to be changed,

choose Edit from the Parameter Menu then choose a new value from the values

listed in the box (see following figures).

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 58 59

Keine Kommentare

Minec 4x Bedienungsanleitung Seite 38